Accessories - Conventional Detection

Aspiration
Detection
- Detectors
- 8100 Series
- Other
- Accessories
- Piping
- Resources
- CAD Drawings
- FAAST Resource Page
Conventional
Detection
- Detectors
- 100 Series
- 400 Series
- Beam Detectors
- Carbon Monoxide
- Heat Detectors
- i³ Series
- Other
- Accessories
- Bases
- Multi-Voltage Relays
- Tools
- 2-Wire Compatibility
- Resources
- BEAM Resource Page
- CAD Drawings
- CO Resource Page
- Heat Resource Page
- i3 Resource Page
Audible/Visible
Notification
- Devices
- Chimes
- Chime Strobes
- Horns
- Horn Strobes
- Speakers
- Speaker Strobes
- Strobes
- Specialty
- ExitPoint
- Mini-Horns
- MNS/General Evacuation
- Other
- Accessories
- Resources
- AV Resource Page
- CAD Drawings
- EASE Evac Software
- EASE Speaker Test Reports
- ECS Resource Page
- ExitPoint Resource Page
- Explanation of Published Voltage, Current, and SPL Specifications
- Online Tools
- Voice Evac Design Info
- Voice Evac Systems
HVAC Systems
Monitoring
- Detectors
- Conventional
- Intelligent
- Specialty
- Special Applications
- Watertight
- Other
- Accessories
- Multi-voltage Relays
- Resources
- CAD Drawings
- InnovairFlex Resource Page
Sprinkler Systems
Monitoring
- Detectors
- Waterflow Detectors
- Specialty
- Alarm Bells
- Explosion Proof
- Switches
- Pressure Switches
- Supervisory Switches
- Other
- Accessories
- Resources
- CAD Drawings
- EC Declaration of Conformity
- Sprinkler Resource Page
- System Sensor Now Offers CPD Approved Flow Switches
Intelligent
Detection
- Detectors
- Beam Smoke Detectors
- Duct Smoke Detectors
- Eclipse
- Filtrex
- Multi-Criteria
- Pinnacle
- Smoke Detectors
- Thermal
- Modules
- Modules
- Other
- Accessories
- Bases
- Resources
- Acclimate Brochure
- AMCF/CO Resource Page
- BEAM Resource Page
- CAD Drawings
- Heat Resource Page
- Multi-Criteria Resource Page
- Pinnacle Brochure

Conventional Detection Product Line

i³ Series • 100 Series • 400 Series • Heat Detectors • Beam Detectors
2-Wire Compatibility • Multi-Voltage Relays • Bases • Accessories • Carbon Monoxide

Conventional Detection
Search for: conv-accessories
	RA100Z Data Sheet (pdf) Installation Instructions (pdf) RA100Z remote annunciator is designed for both conventional and intelligent applications.

	SENS-RDR Data Sheet (pdf) Installation Instructions (pdf) The SENS-RDR is utilizes infrared technology to read the sensitivity of i³ Series detectors.

	2W-MOD2 Data Sheet (pdf) Installation Instructions (pdf) Engineering Specs The 2W-MOD2 is a two-wire loop test and maintenance module for use with i³ Series detectors. (Replaces Model No. 2W-MOD)

	RT The RT is an installation/removal tool for use with i³ Series detectors. Detector removal tool guide

	RRS-MOD Data Sheet (pdf) Installation Instructions (pdf) Engineering Specs The RRS-MOD is a reversing relay/synchronization module for use with i³ Series detectors with built-in sounder.

	A77-AB Data Sheet (pdf) The A77-AB Adapter Bracket allows installers to retrofit applications where a larger diameter detector was previously installed.

	A77-AB2 The A77-AB2 allows installers to retrofit i³ Series detectors where a larger diameter detector was previously installed.

	MOD400R Data Sheet (pdf) Installation Instructions (pdf) The MOD400R is used to check the sensitivity of System Sensor 100, 200, 400, and 500 Series smoke detectors, and DH100, DH200, DH400, and DH500 Series duct smoke detectors.

	SMB600 Data Sheet (pdf) Installation Instructions (pdf) The SMB600 flanged surface mounting kit may be used with certain System Sensor smoke detectors when flush or recessed mounting are not possible.

	XR2 Installation Instructions (pdf) The XR2 is an installation/removal tool for use with previous models of the 100 and 200 series plug-in smoke detectors. Detector removal tool guide

	BEAMMMK Installation Instructions (pdf) Multi-mount kit (Provides ceiling or wall mount capability with increased angular adjustment for either the beam or the reflector. When installed with the transmitter/receiver unit, BEAMSMK must be used as well)

	6500-MMK Installation Instructions (pdf) Heavy duty multi-mount kit (for installations prone to vibration or where there is difficulty in maintaining the set angle. When installed with the transmitter/receiver unit, 6500-SMK must be used as well)

	BEAMSMK Installation Instructions (pdf) Surface-mount kit for BEAM1224(S) and BEAM200(S) when using the BEAMMMK Multi-Mount Kit or when mounting over a recessed junction box.

	6500-SMK Installation Instructions (pdf) Surface-mount kit for use with the BEAM1224 and BEAM200 when using the 6500-MMK Heavy Duty Multi-Mount Kit

	BEAMLRK Installation Instructions (pdf) Long-range kit for BEAM1224 and BEAM200

	BEAMHK Installation Instructions (pdf) Heating kit for use with the transmitter/receiver unit of System Sensor reflective projected beam smoke detectors

	BEAMHKR Installation Instructions (pdf) Heating kit for use with the reflector of System Sensor reflective projected beam smoke detectors

	CO-PLATE Data Sheet (pdf) Installation Instructions (pdf) CO detector replacement plate to cover the footprint of previously installed detectors.

Discontinued Products
Discontinued Model	Installation Instructions	Data Sheet	Replacement Model
RA400Z			RA100Z
The RA400Z is a remote annunciator for use with both conventional and intelligent smoke detectors.
RMK400
The RMK400 Recessed Mounting Kit is for use with System Sensor 100, 200, 400, and 500 Series plug-in detectors.
RR2
The RR2 allows all detectors on a loop to sound when one goes into alarm.
RR1
Polarity reversing relay module intended for use with 2- and 4-wire detectors with built-in sounder
SMK400
The SMK400 flangeless surface mounting kit may be used with certain System Sensor smoke detectors when flush or recessed mounting are not possible.